R.O. Antiscalents
We offer a whole range of liquid antiscalent / antifoulant designed specifically to control scales such as silica, calcium sulphate, barium sulphate, strontium sulphate and reduce fouling. Cleaning Chemicals Liquid formulations designed to remove calcium carbonate and other inorganic scales, can also be used to remove organic foulants from membrane surface Cooling Tower Chemicals Our product offering encompasses all cooling tower treatment solutions such as:
- Alkaline Treatment Program – designed for control of corrosion and scaling in open evaporative cooling systems. We provide both phosphonates and non-phosphorous based solutions
- Biocide Enhancer – Product based on surfactants specifically designed to assist in the control of microbial populations and biofilms in open evaporative cooling systems
- Cold Water system buffer – Stable buffer product for increasing the pH of treated closed water systems back up to their recommended pH range of 8.8 to 9.5
- Mollusc Control Agent – can be used to control mollusks, algae, bacteria, and fungal slimes in a variety of industrial, water-based systems.
- Deposit Control Agents
- Microbiological Control Agent
- Corrosion Inhibitor
Boiler Chemicals
- Boiler Antiscalents – used to prevent scaling inside the boiler system. We offer boiler antiscalents usable in both high and low pressure boilers
- Oxygen Scavengers – used to remove dissolved oxygen from the boiler which is very corrosive at higher temperatures and pressures. This may lead to localized pitting and premature boiler tube failure or excessive feed-water leaks. We offer oxygen scavengers usable in both low and high pressure boilers
- pH Boosters – used to increase the pH of water before it enters the boiler system.
- Condensate Treatment Chemicals – used in the boiler systems to prevent corrosion from happening in the condensate recovery system. Low pH of condensate can lead to severe corrosion and increase the iron levels
- Boiler Descaling Chemicals – used as cleaning agents for scaled up boilers.
Pretreatment/E.T.P. Chemicals (Polymers)
- Coagulants – used to help the suspended particles in waste water coagulate and form flocs. These chemicals are either inorganic, organic or combination of both. Coagulants are used in ETPs, DAFs and many other applications. These coagulants help reduce sludge formation in the ETP & give excellent performance in both primary & tertiary treatment.
- Flocculants – These chemicals are used to gather the destabilized particles together, make them to agglomerate and drop out as big flocs in ETPs. They are also used in sludge dewatering application.
- Color Removal Chemicals – mainly used to remove color form the E.T.P. These chemicals help reduce the total amount of sludge formation thereby reducing the sludge disposal cost.
- Defoaming & Antifoaming Chemicals – these chemicals hinder the formation of foam and can also be used to break a foam already formed